
The Bit That Locks Your Miters Together
A plain miter is two angled faces held by glue alone, so it slips when you clamp it and breaks easily. GaugeX™ Lock Miter Router Bit cuts a stepped profile into both parts, so they hook into each other and form a strong, self-aligning 45° corner.
Slip-free, self-aligning glue-up
More glue area than a plain miter
Clean corner with no end grain on show
Why Woodworkers Switch to a Lock Miter
One Setup Cuts Both Parts
Set the bit height once. Run one board flat on the table and the other on edge against the fence. The two profiles mirror each other and slide together into a locked 45° corner.
Three Sizes for Different Stock
Choose 1-1/2″, 2″ or 2-3/4″ to suit the thickness of your boards: up to 11/16″, 7/8″ or 1-3/16″. All three have a 1/2″ shank. Working with several thicknesses? Get all 3 sizes together.
Clean Corners. No Exposed End Grain.
A lock miter hides the end grain on both parts, so boxes, drawers, cabinets and hollow posts show a clean mitered corner. Cutting edges are tungsten cobalt alloy.
GaugeX™ Lock Miter Bit vs a plain miter joint
|   | GaugeX™ Lock Miter Bit | Plain miter |
|---|---|---|
| Parts self-align at glue-up | ||
| Interlocking joint, not just glue | ||
| Up to 2× more glue surface | ||
| No slipping when you clamp | ||
| No perfect 45° saw cut needed | ||
| Strong without biscuits or splines | ||
| One setup cuts both parts |
Still have questions? We have the answers!
Frequently Asked Questions
What can I make with it?
What can I make with it?
Locking 45° corners for boxes, drawers, cabinets and frames, plus hollow posts, column wraps, faux beams and furniture such as tables, chairs and dressers.
Do I need a router table?
Do I need a router table?
Lock miter bits are meant for a router table. Use the guards and the eye and ear protection your router manual calls for.
Which size should I choose?
Which size should I choose?
Choose by the thickness of your stock: 1-1/2″ (38 mm cutter) for boards up to 11/16″ (17 mm), 2″ (50.8 mm) for standard 3/4″ boards up to 7/8″ (22 mm), and 2-3/4″ (70 mm) for 1″ and thicker stock up to 1-3/16″ (30 mm). If you work with several thicknesses, get all 3 sizes together.
What is the shank size?
What is the shank size?
All sizes have a 1/2″ (12.7 mm) shank, the standard collet on full-size and router-table routers.
What if it is not right for me?
What if it is not right for me?
Every order is covered by our 90-day money-back guarantee, and shipping is free.